• Part of the Kilwaughter Group
Product image for HP12 Base Coat

HP12 Base Coat

HP12 Base Coat is used as a preparation coat for K Rend top coat finishes.

VIEW BROCHUREREQUEST A SAMPLE
Product Description

HP12 Base Coat is used as a preparation coat for K Rend top coat finishes. It can be hand or machine applied and is ideal as stipple coat or for dense backgrounds. With outstanding adhesion and water resistance HP12 Base Coat also makes an excellent scud coat. HP12 is a highly versatile product using 'High polymer' technology for an enhanced performance on difficult substrates such as render carrier boards, dense block, unpainted render and brickwork (used in conjunction with K Rend R7 Primer). Incorporation of Alkali Resistant Reinforcing Mesh is required at stress points such as door and window reveals. HP12 Base Coat can be used in conjunction with all K Rend finishes including Scraped Texture, Thin Coat, Dash, Roughcast and Brick Rend.

Find a Stockist

K Rend products are available from authorised retailers throughout the United Kingdom and Ireland

Features & Benefits

HP12 Base Coat provides a variety of benefits.

High Polymer

High Polymer for enhanced performance on difficult substrates.

Difficult Substrates

This base coat can be applied on to difficult substrates.

Stipple Coat

HP12 Base Coat can be used as a stipple coat.

Hand / Spray Applied

HP12 can be hand or spray applied with ease.

Product Specification

Collapse All

Expand All

Technical Data
Require:

8 - 11kg / sq m approx.

| nominal 4-6mm thickness

Up to 12mm thickness onto masonry substrates

Classifications according to

BE EN 998-1

Compressive strength:

CS IV

Capillary water absorption category:

W2

Thermal conductivity:

P=50% - 0.61

Application Instructions
  • Primary Coat, where required should be applied to substrates as preparation for subsequent coats. Thickness should be as per product specification. It is important to take special care to straighten with a Darby / straight edge to ensure that the next coat is applied to uniform level
  • Form a light key only
  • Allow 24 hours curing time before further application, unless advised otherwise. For info on unusual substrates, seek technical advise
Product Downloads
Technical Data SheetDownload PDF
Application InstructionsDownload PDF

Thin Coat Render Colours

We have a variety of Thin Coat render colours available and we recommend that all colours & textures are verified against a sample, before ordering.
  • Pure White
  • Limestone White
  • Light Bronze
  • Corn
  • Linen
  • Sky
  • Sunflower
  • Causeway
  • Mint
  • Antique White
  • Mocha
  • Golden
  • Rosemary
  • Granite
  • Mink
  • Pearl
  • Ash White
  • Wheaten
  • Pistachio
  • Biscuit
NOT SURE? TRY OUR COLOUR SWATCH SIMULATOR

Products to compare:

View Comparison Table