• Part of the Kilwaughter Group
Product image for K Mono

K Mono

K Mono is a premium machine applied monocouche through-coloured render.

view product flyerrequest a sample
Product Description

K Mono is a monocouche render, designed for use with render spray machines. It acts as a one coat / one pass finish over most moderate to low strength brick and block work, providing a labour-saving and cost-effective solution due to reduced application times.

Find a Stockist

K Rend products are available from authorised retailers throughout the United Kingdom and Ireland

Features & Benefits

K Rend's monocouche render, K Mono, provides a variety of benefits.

One Coat, One Pass

K Mono is a premium monocouche through-coloured render.

Fast Setting

K Mono allows for reduced application times.

Colour Range

K Mono is available in an extensive colour range.

Machine Application

K Mono is optimised for machine application.

Product Specification

Collapse All

Expand All

Technical Data
One Coat Requires:

Approximately 1 bag per m2.

Nominal 16mm finished thickness

One Coat Coverage:

1.6 kg/mm thick per m2

Classifications according to:

BS EN 998-1:2016

Compressive strength:

CS II

Capillary water absorption category:

W2

Water Vapour Permeability:

µ ≤ 15

Thermal Conductivity:

P=50% - 0.44 W/m·K

Application Method

APPLICATION

  • K Mono is designed for use with render spray machines.
  • Add material to the feeding hopper and adjust water supply to achieve the desired consistency. Open time – approx. one hour.
  • For hand application, add 5 – 5.5 litres of clean water per 25kg sack.
  • Do not polish.
  • Small areas such as quoins and window reveals may be finished smooth.
  • Use polythene sheeting to protect doors, windows and other features from any over spraying during application.


ONE PASS APPLICATION

  • Substrates should be clean, sound and free from material that may reduce adhesion.
  • Using a 12mm or 14mm diameter mortar nozzle, spray K Mono directly on to the prepared wall surface to the required thickness of 17 – 18 mm.
  • Level out immediately, using a straight edge, spatula or smoothing trowel.
  • Allow to set (3-24 hours depending on the substrate and drying conditions) before scraping the surface to give the final texture.
Product Downloads
Technical Data SheetDownload PDF

Scraped Render Colours

We have a variety of Scraped Texture render colours available and we recommend that all colours & textures are verified against a sample, before ordering.
  • White
  • Buttermilk
  • Polar White
  • Stone
  • Champagne
  • York
  • Cream
  • Powder Blue
  • Salmon Pink
  • Pewter Grey
  • Terracotta
  • Grey
  • Ivory
  • Sterling White
  • Arran
  • Sandstone
  • Green
  • Cinnamon
  • Fintry Stone
  • Oatmeal
NOT SURE? TRY OUR COLOUR SWATCH SIMULATOR

*White is the brightest white within the scraped texture range, however it is not a brilliant white.
Polar white is an off white shade, whilst cream has a yellow tone to it.

Products to compare:

View Comparison Table